GridGain Developers Hub

GridGain 8.9.5 Release Notes

Overview

GridGain 8.9.5 brings a number of bug fixes and improvements to performance of GridGain.

New Features

Cancelling Running Queries

This release extends GridGain control over running queries with the new kill sql and kill continuous control script. You can use these commands to stop running sql or continuous queries.

Additionally, a new SQL KILL CONTINUOUS operational command was added that can be used to stop continuous queries.

Asynchronous TTL Update

In this release, a new touchAsync(key) method was added. This method resets the key TTL asynchronously without loading the key into memory. The method returns a future that, once resolved, provides information if the TTL was updated.

IgniteFuture<Boolean> fut = igniteCache.touchAsync(key);

fut.listen(f -> System.out.println("Time-to-live value was " + (f.get() ? "successfully" : "not") + " updated."));

Touch operations are only supported for atomic caches, and are only guaranteed to avoid loading the cache entry into on-heap memory on in-memory clusters.

Improvements and Fixed Issues

Community Edition Changes

Issue ID Category Description

GG-39244

Binary Objects

Fix potential hanging on client node disconnect while waiting for a future.

GG-39187

Cluster Storage Engine

Introduced new method IgniteCache.touchAsync(key) that allows to update the time to live vale for the specified key asynchronously.

GG-39172

Cluster SQL Engine

Added recovery of in-memory text indexes at node startup.

GG-38922

Cluster Communication

When node gets inbound connection for the client that is already occupied by existing connection node will check validity of that connection.

GG-38719

Cluster Storage Engine

Optimized heap memory consumption of IgniteCache.remove operation for atomic caches.

GG-37214

Cluster Storage Engine

Thread dump is now printed to log if thread pool starvation is detected.

GG-35894

Platforms & Thin Clients

.NET: Thin client: Added endpoint randomization for load balancing.

Enterprise Edition Changes

Issue ID Category Description

GG-39265

General

Updated bouncycastle module from version 1.75 to version 1.78.

GG-39246

General

Updated hadoop from version 3.3.6 to version 3.4.0.

GG-39152

Cluster Data Replication

Fix potential hanging in DR thread when sender node left the grid.

GG-38909

Cluster Control Script

Fixed an issue that could prevent cancelling the partition reconciliation command on secure clusters.

GG-36989

Cluster Continuous Queries

Additional API was added that can be used to stop SQL and Continuous queries.

Installation and Upgrade Information

See the Rolling Upgrades page for information about how to perform automated upgrades and for details about version compatibility.

Migrating From GridGain 8.9.0

GridGain 8.9.1 introduced a large number of changes in default configuration values. Your setup may be affected if you are using default configuration.

When migrating to GridGain 8.9.5, make sure to check Changed Default Values in GridGain 8.9.1 and Later section for any parameters you need to change.

Migrating From GridGain 8.X

When migrating from GridGain 8.8 to GridGain 8.9, no special actions are required for core functionality migration. By using rolling upgrades, you can update from any GridGain version listed below. You may need to perform minor configuration changes to ensure stability post migration.

  • If you are using GridGain Enterprise or Ultimate, the COPY command was reworked as described in the [COPY Command Changes] section. The syntax for working with CSV remains the same, but the path is now calculated on the node and the client. This change does not affect GridGain Community edition.

    To disable this behavior and use the old copy command, pass the disabledFeatures=SERVER_BULK_LOAD parameter in the JDBC connection command:

    jdbc:ignite:thin://127.0.0.1/?disabledFeatures=SERVER_BULK_LOAD
  • If you are using one of the optional modules listed in the [Removed Modules] section, they will continue to work, but compatibility and stability on GridGain 8.9 is not guaranteed. Consider using the alternatives:

  • If you are using default values in your configuration, you may need to set them manually to keep you cluster working the same way as in previous versions. Make sure to check Changed Default Values in GridGain 8.9.1 and Later section for any parameters you need to change.

Older GridGain Versions Compatibility

Below is a list of versions that are compatible with the current version. You can rolling-upgrade from any of those. Compatibility with other versions is not guaranteed. If you are on a version that is not listed, contact GridGain for information on upgrade options.

8.7.22, 8.7.28, 8.7.29-p1, 8.7.32, 8.7.34, 8.7.38, 8.7.39-p2, 8.7.42-p2, 8.8.1, 8.8.2, 8.8.2-p1, 8.8.3, 8.8.4, 8.8.4-p1, 8.8.4-p2, 8.8.5, 8.8.6, 8.8.7, 8.8.8, 8.8.8-p1, 8.8.9, 8.8.9-p1, 8.8.10, 8.8.11, 8.8.12, 8.8.13, 8.8.13-p1, 8.8.13-p2, 8.8.14, 8.8.15, 8.8.16, 8.8.16-p1, 8.8.16-p2, 8.8.17, 8.8.18, 8.8.18-p1, 8.8.19, 8.8.19-p1, 8.8.20, 8.8.21, 8.8.22, 8.8.22-p1, 8.8.22-p2, 8.8.23, 8.8.23-p1, 8.8.23-p2, 8.8.23-p3, 8.8.24, 8.8.25, 8.8.25-p1, 8.8.26, 8.8.27, 8.8.28, 8.8.29, 8.8.30, 8.8.31, 8.8.32, 8.8.33, 8.8.34, 8.8.35, 8.8.36, 8.8.37, 8.8.37-p1, 8.8.38, 8.8.39, 8.9.0, 8.9.1, 8.9.2, 8.9.3, 8.9.4

Apache Ignite Versions Compatibility

Below is a list of versions that are tested for basic compatibility with the current version. If you are on a version that is not listed, contact GridGain for information on upgrade options.

2.11.1, 2.12.0, 2.13.0, 2.14.0, 2.15.0

Known Limitations

Changed Permissions for Control Center Agent in GridGain 8.9.4 and Later

GridGain 8.9.4 introduced stricter permissions checking for Control Center Agent. When running secured clusters, some actions that previously were available without permissions, will now require additional permissions.

Before updating, make sure to provide the required permissions, otherwise some actions may become unavailable.

New TRACING_CONFIGURATION_UPDATE Permission in GridGain 8.9.2 and Later

GridGain 8.9.2 introduced the TRACING_CONFIGURATION_UPDATE permission. If you were using security on a cluster before updating to this version, make sure that you provide the permissions to control utilities or users who need to update cluster permissions. Otherwise, they will not be able to update

Changed Default Values in GridGain 8.9.1 and Later

If you are updating from GridGain 8.8.X or 8.9.0, a large number of default values have been changed.

These changes may affect the stability or performance of your cluster if you are using default values.

We recommend checking the list below to make sure the changes do not have an adverse effect, and setting the value manually if necessary.

  • Service processor now use event-driven implementation by default. You can keep the old behavior by setting the IGNITE_EVENT_DRIVEN_SERVICE_PROCESSOR_ENABLE property to false. Make sure that all nodes in the cluster are set to the same value. See Services documentation for more information.

  • Data region metrics are now enabled by default. This may have a minor (within 2%) adverse effect on performance. You can keep the old behavior by setting the DataRegionConfiguration.metricsEnabled value to false.

  • Data storage metrics are now enabled by default. This may have a minor (within 2%) adverse effect on performance. You can keep the old behavior by setting the DataStorageConfiguration.metricsEnabled value to false.

  • TcpCommunicationSpi communication protocol now has a limit of 4096 messages for the outgoing messages queue by default.

  • Atomic operations are now not allowed in transactions by default. You can keep the old behavior by setting the IGNITE_ALLOW_ATOMIC_OPS_IN_TX value to true.

  • Logs are now in verbose mode by default. You can use the -q command line argument in the ignite.sh script to keep current log behavior.

  • SQL queries are now loaded lazily by default. This reduces memory consumption on medium and large queries and potentially improves garbage collection performance. You can keep the old behavior by setting the SqlFieldsQuery.setLazy(false).

  • Cache entries are now read from primary partitions by default, even if an entry is available on the node in a backup partition. This may have a minor performance impact, but significantly increases cluster stability. You can keep the old behavior by setting the readFromBackup property to true.

  • Partition map exchange transactions now time out after 1 minute instead of 0 (infinite) by default. You can keep the old timeout by setting the TX_TIMEOUT_ON_PARTITION_MAP_EXCHANGE setting to 0.

  • Data streamer now overwrites entries by default. You can keep the old behavior by setting the stmr.allowOverwrite property to false.

  • TCP discovery now uses static IP finder TcpDiscoveryVmIpFinder by default. To keep the old behavior, set the IP finder to use multicast IP finder.

  • Checkpointing process now starts upon reaching 75% of minWalArchiveSize instead of 25%. You can keep the old behavior by setting the IGNITE_CHECKPOINT_TRIGGER_ARCHIVE_SIZE_PERCENTAGE system variable to 0.25.

Jetty Configuration Incompatibility in GridGain 8.7.21 and Later

If you are upgrading from version 8.7.20 or earlier, consider an incompatibility issue related to Jetty configuration introduced in GridGain 8.7.21.

Your setup may be affected if:

  • You use the ignite-rest-http module (e.g. to connect to GridGain Web Console)

  • You have a custom Jetty configuration that enables SSL for REST

  • Your Jetty configuration uses the org.eclipse.jetty.util.ssl.SslContextFactory class

  • The keystore specified in the Jetty configuration contains both the CA certificate and the private certificate

In this case, after starting a new version, an exception is thrown with an error message similar to the following:

java.lang.IllegalStateException: KeyStores with multiple certificates are not supported on the base class
org.eclipse.jetty.util.ssl.SslContextFactory. (Use org.eclipse.jetty.util.ssl.SslContextFactory$Server
or org.eclipse.jetty.util.ssl.SslContextFactory$Client instead)

To workaround this issue, alter the Jetty configuration to use org.eclipse.jetty.util.ssl.SslContextFactory$Server or org.eclipse.jetty.util.ssl.SslContextFactory$Client. See the configuration example at the Client Certificate Authentication page.

Default rebalanceThreadPoolSize in GridGain 8.7.26 and Later

In GridGain 8.7.26, the default value of the property IgniteConfiguration.rebalanceThreadPoolSize changed from 1 to min(4, number of CPU / 4). It may cause a compatibility issue under the following conditions:

  • When a Rolling Upgrade is performed

  • The upgrade is performed from 8.5.7 version (or earlier) to 8.5.x or from 8.7.3 (or earlier) to 8.7.x

  • The server nodes have at least 8 CPU cores

  • The nodes configuration does not have the property IgniteConfiguration.rebalanceThreadPoolSize, so the default value is used

In this case, an exception is thrown with an error message similar to the following:

сlass org.apache.ignite.IgniteException: Rebalance configuration mismatch (fix configuration or set -DIGNITE_SKIP_CONFIGURATION_CONSISTENCY_CHECK=true system property).
Different values of such parameter may lead to rebalance process instability and hanging.  [rmtNodeId=5fc58fb7-209d-489a-8034-0127a81abed6, locRebalanceThreadPoolSize = 4, rmtRebalanceThreadPoolSize = 1]

To workaround this issue, change the configuration of the server nodes to rebalanceThreadPoolSize=1 so that it matches the previous default configuration. For example:

<bean class="org.apache.ignite.configuration.IgniteConfiguration">
    <property name="rebalanceThreadPoolSize" value="1"/>

    <!-- The rest of the configuration goes here -->
</bean>

Jetty Doesn’t Accept Incorrect Configuration in GridGain 8.7.31 and Later

In GridGain 8.7.31 Jetty was upgraded to 9.4.33. Starting that version, Jetty has more strict validation of the provided configuration files. Before that version, an incorrectly spelled property in the configuration file had no effect. Starting this version, errors in the configuration will lead to an error on start.

Your setup may be affected if:

  • You use the ignite-rest-http module (e.g. to connect to GridGain Web Console)

  • You have a custom Jetty configuration for REST

  • The custom configuration has errors in it

You will need to fix the custom Jetty configuration before upgrading.

ignite.sh No Longer Enables Remote JMX by Default in GridGain 8.7.31 and Later

Starting from 8.7.31 version, GridGain no longer attempts to automatically enable the remote JMX. Default settings are known to cause issues if customized (for example, secure the connection). Also, in most cases, remote JMX is not required since many tools use local JMX connections (not using TCP).

Your setup may be affected if:

  • You start GridGain nodes via ignite.sh script

  • You connect to GridGain nodes' JMX interface remotely over TCP using the default configuration

To continue using remote JMX, you need to manually specify the required JMX settings. Please see the example below. Note that you don’t need remote JMX if you use a local connection, such as connecting JConsole to a GridGain process on the same host.

export JVM_OPTS="-Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=33333 \
    -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false"

bin/ignite.sh

.NET: GridGain Nuget Package Misses GridGain.Ignite Jars in 8.8.17 and Later

Starting with GridGain 8.8.17, the GridGain.Ignite dependency is not included in the Nuget package. To use GridGain in your project, make sure to include the dependency explicitly so that jars from it are included.

We Value Your Feedback

Your comments and suggestions are always welcome. You can reach us here: https://gridgain.freshdesk.com/support/login or docs@gridgain.com

Please visit the documentation for more information.